RSS export of job openings - Only featured job openings : No / Region : Europe-->United Kingdom-->Bridgwater, Europe-->United Kingdom-->Cranfield

2026-28088 - Construction Manager

Tue, 20 Oct 2026 13:37:30 Z

Category : TB - CONSTRUCTION & COMMISSIONING/TB1 - Construction management
Job type : Non fixed term
Job details :
We are currently seeking a Construction Manager to join our team in Hinkley Point C, Bridgwater to ensure assigned site and project works are planned and delivered in line with QHSE requirements and with agreed contractual obligations and expectations with the intention to create a positive and collaborative client relationship. What will you be doing? Within this position you will be responsible for: Planning, coordinating and managing construction activities to ensure safe, efficient and compliant project delivery Organising and deploy labour, equipment, materials and subcontractor resources to meet programme requirements. Responsible for maintaining health, safety and quality standards Leading and supervise construction teams, ensuring clear direction, effective performance and accountability. Keeping detailed records of construction site activities Never instruct work to be carried out without first ensuring that means will be in place to guarantee that the work can be done in a safe and compliant manner. Be suitably familiar with the contents of the HSE Plan to be able to ensure that they are fully complied with, including but not limited to: - Attending any HSE training, meetings, etc. as requested. Attending and actively participating in coordination, planning and project meetings, including leading Toolbox Talks where required, ensuring clear direction, communication and implementation of project objectives Ensuring that workers have undergone sufficient HSE training to comply with the project HSE training requirements and be able to carry out all works safely. Ensuring that tools, equipment and materials brought into and used in the area are fully compliant with HSE requirements. Ensuring that no work is carried out unless supported by the relevant specific Method Statements, Risk Assessments and Work Permits. Participating in Risk Assessments. Conducting regular HSE inspections within the area of responsibility, promoting a positive safety culture and fostering collaborative relationships with workforce, clients, stakeholders and delivery partners. Key Outputs: Provide scope of works and schedules for workers. Liaise with contractors, managers and other stakeholders, ensuring that all parties remain coordinated. Participate in Risk Assessments. Carry out periodic HSE inspections in the area. Ensure that all incidents and near misses are reported, as per procedure. Ensure that disciplinary matters are reported, quickly and accurately.

What are we looking for? Training & Development expectations: SMSTS (Site Manager Safety Training Scheme) CSCS Supervisor IOSH Managing Safely NVQ Level 3 Occupational Work Supervision City and Guilds in Engineering First Aid training Person specification: Lead and inspire site teams to deliver outstanding results Champion safety and compliance, with a strong understanding of Construction (Design and Managemennt) Regulations 2015 Manage complex mechanical, welding and fabrication projects, including stainless steel systems Thrive in nuclear and other highly regulated environments Build strong relationships with clients, stakeholders and project partners Drive collaboration, clear communication and successful project delivery Take ownership, make decisions and lead with confidence Work effectively across diverse, multinational teams Work pattern: On-site Salary: £67,528.81 per annum Benefits: The benefits of the role include: Bonus Travel allowance Lodge allowance (eligibility for this benefit is dependent on meeting specific criteria) Overtime
Minimum level of education required : Technical Certificate / Diploma

2026-28087 - SAP Coordinator

Fri, 16 Oct 2026 14:07:52 Z

Category : SC - SUPPLY CHAIN/SCB - SUPPLY CHAIN
Job type : Fixed term
Job details :
The SAP Coordinator is responsible for coordinating SAP-related warehouse and logistics business processes, maintaining accurate system data, supporting daily operations, and ensuring smooth communication between departments such as Procurement, Quality, Warehouse and Logistics. The role involves monitoring transactions, resolving system-related issues, preparing reports, and ensuring that SAP procedures are followed correctly. Key Responsibilities Thorough analysis and system checking of processes/workflows that ensure the SAP system meets the defined requirements. Label creation from SAP database as requirement from Project managers. Update Inhouse Application to get crate inventory data on weekly bases. To update, Integrate multiple SAP Extract into Database Responsible for working alongside the Material Data Coordinator to identify obsolete SAP data and rectify accordingly to ensure data standards are maintained to promote integrity, reliability, and efficiency of the system. Support Back office Logistic Team for creation of Outbound delivery and issues related to handling units. Assisting with the User Acceptance Test (UAT) of new released SAP modules prior to implementation and ultimate deployment to the business An understanding of the business practices and procedures – which in turn led by the Site SAP Transformation Manager will be used to design, develop, and maintain workflow processes. Collaborate with all SAP users to assess current and future information needs for the business. Responsible for the creation of Purchase Orders, Stock Transport Orders (STO) till the point of consumption by Operations To Support Warehouse related SAP functionality and support Warehouse manager and Site SAP Transformation manager to work upon system backlog. SAP System Coordination: coordinate daily SAP activities and ensure that transactions are processed accurately and on time. Data Management: Create, update, and maintain master data, including vendor, customer, material, and other business records, as applicable. Transaction Processing: Enter, verify, and monitor SAP transactions related to purchasing, inventory, Goods/Service/Invoice Receipt, or logistics Related Transactions. Reporting: Prepare SAP reports, track operational performance, and provide data to management and relevant departments. Department Coordination: Liaise with internal teams to ensure smooth workflow and timely completion of SAP-related activities. Issue Resolution: Identify transaction errors, investigate discrepancies, and coordinate with the SAP support team to resolve issues. Documentation: Maintain accurate records, transaction logs, process documents, and audit-related information. Process Compliance: Ensure that SAP procedures, company policies, and internal controls are followed. User Support: Assist employees with basic SAP queries, transaction processing, and system navigation. Process Improvement: Identify opportunities to impro

• Bachelor’s degree in business technology, Information Technology, Supply Chain Management, Engineering or relevant discipline. • Experience working with SAP ERP or SAP S/4HANA. • Good knowledge of Microsoft Office Application, and reporting tools. • Strong data entry, analytical, and problem-solving skills. • Excellent communication and coordination abilities. • High attention to detail and accuracy. • Ability to manage multiple tasks and meet deadlines. • Knowledge of relevant SAP modules, such as MM, QM, SD, PP, or WM/EWM, depending on the department. • Experienced: Typically, 3–5 years of experience in SAP related functionality and Operations, or a related role.
Minimum level of education required : HS Diploma or GED
Language / Level :
English : Fluent

2026-27364 - Site Contract and Commercial manager

Fri, 16 Oct 2026 08:23:48 Z

Category : G - PROJECT MANAGEMENT/G3 - Contract management
Job type : Non fixed term
Job details :
Based on Hinkley Point Construction Site, the Site Contract & Commercial Manager core missions are the following: Contract management Manage and administer the main contract and associated subcontracts for UK4101 scope Ensure compliance with contractual obligations (terms, milestones, deliverables) Interpret contract clauses and provide guidance to project teams Lead contractual correspondence with the client (EDF/NNB) Manage notifications, claims, and variation orders Coordinate Early Warning management for site topics Commercial management Prepare the commercial offers (variation proposal, claims, budgetary offers) and attend the Offer Review Meetings to approve internally the offer content before submission to Coordinate with the Customer to clarify on one hand Variation Requests (VAR) and on the other hand Variation Proposals (VP) Ensure communication and negotiation with the Customer Coordinate transverse topics Ensure a smooth and effective communication between the respective CCM Teams (HPC and Framatome) Collect any request from the Customer related to Contract/Commercial, clarifies them where required and define / propose actions Collect any request from Framatome related to Contract/Commercial, clarifies them where required, transmits and explains the requests to the appropriate HPC members Contribute to project risk reviews (contractual and commercial risks). Develop mitigation strategies and track implementation Ensure contractual risks are properly escalated and managed Ensure compliance with Framatome procedures and governance rules Support audits (internal/external) Ensure proper documentation and traceability of contractual decisions

Educational Basics: Master’s degree in Engineering, Law, Business, or related field Significant experience in contract & commercial management on large EPC projects knowledge of complex contracts (e.g., FIDIC or bespoke nuclear contracts) Experience ideally in nuclear or highly regulated industries is highly desirable Experience working on-site in an international environment would be highly appreciated Knowledge / Soft skills: About 5-years’ experience, ideally in Large Projects Excellent communication skills and stakeholder management Results orientation, reliable, analytical capabilities, sense of synthesis Customer orientation English level: High-Elementary (Bright Test reference) at minimum Strong contractual and commercial acumen Negotiation and dispute resolution skills Ability to work under pressure in a complex project environment Computer literate: standard Microsoft package
Minimum level of education required : Master
Language / Level :
English : Fluent

2026-28075 - Quality Engineer

Thu, 15 Oct 2026 15:25:40 Z

Category : Q - QUALITY & INSPECTION/Q3 - Supplier & customer quality
Job type : Non fixed term
Job details :
We are currently seeking a Quality Engineer here to join our team in Hinkley Point C, Bridgwater to support the quality process to ensure the high level of quality standards are maintained and in accordance with the relevant requirements What will you be doing? Ensure compliance to the Quality Management Systems, policies and procedures to assure continuing compliance to ISO 9001 standards Liaise with internal and external customers on Quality concerns. Coordinate monthly review and reporting of progress against the annual quality improvement plans Ensure compliance to the Contract Quality Assurance Plan/General Quality Assurance Specifications/Supplier Quality Plan/Project Quality Management Plan Undertake project work in support of quality department, on topics such as: problem solving, investigation reporting, audit and governance programmes etc. Prepare/review/approve/maintain project quality documentation such as: Quality Plan/Manual, Technical Procedure writing (NDT, Dimensional, Cleanliness), ITP, process procedures and instruction writing Raising internal/external NCRs, formal Technical queries (RFIs) and Field Change Requests where ever required Development, support, and maintenance of the project quality deliverables in line with project schedules. (These include LTQR / QRC / Review and update of records following client comments) Act as in-house council to provide guidance and solutions to internal functions on Quality matters Ensure compliance to customer and product specifications through rigorous inspections – regular Client liaison Monitor and internally audit Goods in, welding, calibrated equipment & inspection activities. Monitor sub-contractor quality activities on-site. Approving incoming materials by confirming specifications; rejecting and returning unacceptable materials and reviewing material certification and ensuring vigilance to CFSI requirements / Goods in/Out Procedure Approving in-process production by confirming specifications; ensuring correct documentation is distributed and communicating required adjustments to production supervisor. Approving finished products by confirming specifications; occasionally conducting visual and measurement tests; returning products for rework; confirming rework. Reviewing inspection records tracking; summarizing rework and waste & interdepartmental co-ordination. Review and compile all Life Time Quality Records required per product. Maintaining a safety conscious work environment by following standards and procedures; complying with legal regulations Accomplishing quality and organising jobs by completing related results as needed Managing non-conformities and help to address them, managing corrective and preventative actions and organising their implementation. Exchanging with the internal/client quality inspector Compilation of final manufacturing records and LTQRs Assist the workshop/Onsite implementation of Lean and 6Sigma activities

What are we looking for? Qualifications: Recognised Engineering Qualification ONC/BTEC/C&G/HNC/HND (or higher required) Multi discipline non-destructive testing training Visual Weld Inspection - Welding Institute Course Responsible welding co-ordinator (desirable) NVQ Level 3 Leadership & Management (desirable) ISO:9001:2015 Internal Auditor ISO9001:2015 Lead Auditor CCCNSG / HS&E MAPS - Managers and Professionals Test (required) Lean or Six Sigma (desirable) HPC Site Induction (desirable) Technical Skills: Chartered Quality status Familiar with pre heat and post weld heat treat methods. Understanding of the nuclear steam supply system. Knowledge of Quality tools and systems e.g. Six Sigma, Lean, EFQA etc. Proven relevant experience as a QA Engineer A good understanding of FIDIC and or NEC3 contracts. A good working knowledge of Project Management protocols and standards. Experience of managing multiple projects at one time at differing stages Experience of developing and implementing processes and procedures. Lead auditor experience Experience leading investigations / problem solving High level of competence in MS Office products Sound welding knowledge Knowledge in fabrication Knowledge in installations Previous experience of working in a multinational team would be beneficial Previous experience in a highly regulated industry advantageous Knowledge of ISO 14000 and ISO 45001 Behaviour Skills: Questioning attitude Good team working skills The ability to work with a low level of supervision and intervention Highly organised with attention to detail Good leadership skills Good communication and interpersonal skills including influencing and presenting Ability to work in a team as well as on own initiative with a can -do attitude Ability to take responsibility for problems within their own remit and to deliver solutions Results focused with the ability to meet commitments and deadlines. Logical thinking Discretion, ability to maintain confidentiality Work pattern: On-site Salary: £53,000-£73,000 (Depending on experience)
Minimum level of education required : Technical Certificate / Diploma

2026-26156 - HPC - QC Manager F/H

Thu, 15 Oct 2026 15:10:24 Z

Category : TA - DESIGN & ENGINEERING/TAA - Design , engineering management & Systems engineering
Job type : Non fixed term
Job details :
Responsibilities: Planning numbers of inspectors required according to the progress of the works. Performing and/or supervising subcontracted NDT operations on site, Responsible for drawing-up and issuing test and inspection reports, Performing and monitoring the NDT technical inspection (X-ray films, comprehensiveness of the films submitted by the subcontractor, compliance with procedures, etc.). Ensuring, in conjunction with the site Logistics Manager, the availability on site of inspection equipment and their return to the store. Attendance at the EM2 weekly internal progress meeting Production of a weekly report to inform IBSQ head office of progress on inspection activities and problems associated with these activities. Examination of documents created, revised, modified and checked by the "Site Methods" unit on site. Assisting with the acceptance of equipment, hardware and consumables, if necessary in conjunction with the EM2 store or FRAMATOME site logistics manager, Participating in the pre-check signoff of the quality plans. Assisting in the opening and processing of nonconformance reports, deviation reports and observation sheets. Assisting the methods unit in compiling the Erection Work Completion report for the various items of equipment. Gathering together, as the works progress, the documents (Follow-Up Documents, records, etc.) proving the satisfactory performance of the work, up to the completed FUD (including external IBS approvals). Ensures that the notifications, according to the monitoring documents to the supervisory organizations (customer) , have been issued. He/she also ensures that the site work monitoring documents are updated by the erection teams, Signing of "concreting approvals" before issue, Centralizing and formalizing all information liable to provide feedback in order to improve our erection operations. Managing calibrated appliances and tools (in collaboration with the logistics unit performing revalidation), Time management of personnel placed at his/her disposal and contractual follow-up of NDT subcontractors.

Profile: General engineer or quality control manager having extensive experience of NDT testing in nuclear power plants. Fully conversant with the various applicable construction and inspection codes and the rules imposed by the customer of the project. Desired qualification: COFREND 3 X-ray and COFREND 2 US Ability to manage a team (of expatriates and local personnel) and subcontractors Ability to form quality relationships with the different interfacing units, both internally and with the supervisory units of the customer or the safety authorities, subcontractors and local service providers. Very exacting, with highly developed organizational skills Ability to manage contracts, meet set budgets and produce reports, Fluency in English essential.
Minimum level of education required : Master
Language / Level :
English : Fluent

2026-26157 - HPC - Responsable Contrôle Qualité - Expatriation UK F/H

Wed, 14 Oct 2026 10:52:55 Z

Category : TA - DESIGN & ENGINEERING/TAA - Design , engineering management & Systems engineering
Job type : Non fixed term
Job details :
Vos missions : Missions principales : -Planifier les besoins en inspecteurs en fonction de l’avancement des travaux -Réaliser et/ou superviser les opérations de contrôle non destructif (CND) sous-traitées sur site -Rédiger et valider les rapports d’essais et d’inspection -Assurer le suivi technique des contrôles CND (analyse des radiographies, conformité aux procédures, exhaustivité des contrôles réalisés, etc.) -Garantir, en lien avec la logistique du site, la disponibilité et la gestion des équipements d’inspection Suivi & coordination : -Participer aux réunions internes hebdomadaires de suivi d’avancement (EM2) -Produire un reporting hebdomadaire à destination du siège (suivi des activités et gestion des problématiques) -Examiner et valider les documents techniques produits ou modifiés par l’équipe Méthodes sur site -Veiller à la bonne mise à jour des documents de suivi des travaux par les équipes terrain -S’assurer de la transmission des notifications aux organismes de contrôle (clients) Qualité & conformité : -Contribuer à la réception des équipements, matériels et consommables -Participer à la validation des plans qualité (pré-acceptation) -Appuyer l’ouverture et le traitement des non-conformités, écarts et observations -Assister les équipes Méthodes dans la constitution des dossiers de fin de travaux -Collecter et structurer les documents garantissant la conformité des réalisations (dossiers de suivi, enregistrements, validations internes/externes) -Valider les autorisations de bétonnage avant émission Amélioration continue & gestion : -Capitaliser le retour d’expérience pour optimiser les opérations de montage -Assurer la gestion et le suivi des équipements et instruments étalonnés -Encadrer les équipes mises à disposition et assurer le suivi contractuel des sous-traitants CND

Votre profil : Ingénieur généraliste ou responsable contrôle qualité disposant d’une solide expérience en contrôle non destructif (CND) dans les centrales nucléaires Excellente maîtrise des codes de construction et d’inspection applicables ainsi que des exigences imposées par le client du projet Qualifications souhaitées : COFREND niveau 3 en radiographie (RT) et COFREND niveau 2 en ultrasons (UT) Capacité à encadrer des équipes multiculturelles (personnel expatrié et local) ainsi que des sous-traitants Aptitude à établir des relations de travail de qualité avec les différentes interfaces : équipes internes, représentants du client, autorités de sûreté, sous-traitants et prestataires locaux Rigueur, exigence et excellentes compétences organisationnelles Capacité à piloter des contrats, respecter des budgets et produire des reportings structurés Maîtrise indispensable de l’anglais
Minimum level of education required : Master
Language / Level :
English : Fluent

2026-28044 - JDO Piping Design Engineer

Wed, 14 Oct 2026 09:06:17 Z

Category : TA - DESIGN & ENGINEERING/TAA - Design , engineering management & Systems engineering
Job type : Non fixed term
Job details :
What are we hiring for? We are seeking a JDO Piping Design Engineer to join our team in Hinkley Point C, Bridgwater to support with field design activities for the piping discipline within the HPC project. The role involves managing interfaces with multiple disciplines and resolving piping engineering issues encountered during on-site installation of pipework and associated supports. The engineer will ensure compliance with nuclear industry standards and project milestones while maintaining EPR-E procedures. What will you be doing? The main tasks will include both Piping Design tasks and Mechanical Calculation tasks: Piping Design role: Gathering input data. Engaging with various stakeholders (installation contractors, CW interfaces, other disciplines) to clarify issues. Producing site request technical assessment (RFI, FCR, NCR) concerning design issues on piping, support and anchorage scopes. Contributing to other teams (Layout, Transverse, etc…) by providing piping assessments or general guidance as required. Proposing appropriate and proportionate modifications if sizing criteria are not met. Closing open points and comments. Assessing and integrating modification coming from the stakeholders after packages handed over to JDO. Maintaining EPR-E’s QA procedures in delivering the design. Working with CAD designers/detailers in the preparation of the design drawings. Contributing to the update of site design documentation such as tolerance notes or catalogue of standard solutions. Mechanical Calculation role: Using calculation notes and guide drawings subcontracted to external companies. Perform analytical calculations and creating/running macros to assess the feasibility of modification. Perform piping flexibility calculations, piping support calculations, and finite element analysis (FEA) to address installation and operational issues using PipeStress, RSTAB & ANSYS software’s. Design and calculate anchorages (Pre/Post Embedded Plates using VerifPlatines software or Hand calculations), welds, and bolted connections for piping and equipment supports. Offer technical support to others disciplines for a wide range of calculations: Check steel structures (e.g., base frames, racks), supports for electrical cabinets, batteries, boxes, main cable trays, instrumentation (pressure/temperature/level sensors), and HVAC support systems (for ducts, chillers, condensers, centrifugal fans etc..). The employee will be highly interacting with the operational lead to provide them with technical assessments. They will be in charge of interacting with the different stakeholders to ensure the closure of site queries in compliance with the HPC project milestones.

What are we looking for? Essential Qualifications, Experience and Skills: Master’s in science, Mechanical engineering degree. First experience of 3 years minimum in Mechanical Calculation, nuclear industry, or equivalent experience. Knowledge of EUROCODE, ASME and RCC-M code. Knowledge of 2D/3D design and calculation software. If possible, knowledge of these specific software: PDMS, NavisWorks, PIPESTRESS, RSTAB, ANSYS APDL and WORKBENCH. Knowledge of piping and support calculation tools. Experience working in a multicultural environment. Curious, autonomous, rigorous and motivated to learn. Desirable Qualifications, Experience and Skills: Knowledge of the HPC project or previous EPR and associated studies/doctrine is a real asset Knowledge of Nuclear engineering and specificities, building NI, CI & BoP buildings would be beneficial. Excellent Interpersonal skills, conscientiousness, organisation, writing ability Good organizational, writing and oral expression skills in English are essential for the realization of the activities of document production, steering and interfaces with the various correspondents. Ability to meet commitments and deadlines. Level of Experience: 3 years of professional experience post-graduation Languages (level) English fluent (required) French – bonus
Minimum level of education required : Technical Certificate / Diploma

2026-28043 - JDO Mechanical Calculation Engineer

Wed, 14 Oct 2026 08:31:09 Z

Category : TA - DESIGN & ENGINEERING/TAD - Mechanical Engineering
Job type : Non fixed term
Job details :
What are we hiring for? We are seeking a JDO Mechanical Calculation Engineer here to join our team in Hinkley Point C, Bridgwater to support with field design activities for the piping discipline within the HPC project. The role involves managing interfaces with multiple disciplines and resolving piping engineering issues encountered during on-site installation of pipework and associated supports. The engineer will ensure compliance with nuclear industry standards and project milestones while maintaining EPR-E procedures. What will you be doing? Within this position you will be responsible for: Data Collection and Analysis: o Gather input data, analyse/update hypothesis notes, and prepare detailed loading description reports for piping systems and supports. Mechanical Stress Analyses: o Perform piping flexibility calculations, piping support calculations, and finite element analysis (FEA) to address installation and operational issues using PipeStress, RSTAB & ANSYS software’s. o Conduct dynamic analysis of nuclear structures and components under seismic, thermal conditions (pseudo-static/dynamic), including frequency analysis and structural rigidity assessment. o Design and calculate anchorages (Pre/Post Embedded Plates using VerifPlatines software or Hand calculations), welds, and bolted connections for piping and equipment supports. Design and Modification: o Propose proportionate modifications when sizing criteria are not met. Verification and Quality Control: o Check steel structures (e.g., base frames, racks), supports for electrical cabinets, batteries, boxes, main cable trays, instrumentation (pressure/temperature/level sensors), and HVAC support systems (for ducts, chillers, condensers, centrifugal fans etc..). o Support and assist Equipment Department to verify calculation notes for various equipment such as Pumps, Valves, Flanges, Heat exchangers, Tanks, and Pressure Vessels. Technical Support and Documentation: o Provide technical clarifications to NNB and respond to site requests (RFI, FCR, NCR). o Offer technical support to others disciplines for a wide range of calculations (handling systems…) o Prepare and review technical documentation to support design and installation activities. Collaboration: o Collaborate with installation contractors, civil works (CW) interfaces, and other disciplines (e.g., Electrical, HVAC, Equipment etc) to clarify and resolve site queries, ensuring alignment with project requirements. Drawing Support: Collaborate with CAD designers to assist for accurate design drawings using 2D and 3D software. The employee will be highly interacting with the operational lead to provide them with technical assessments. They will be in charge of interacting with the different stakeholders to ensure the closure of site queries in compliance with the HPC project milestones.

What are we looking for? Essential Qualifications, Experience and Skills: • Master’s in science, Mechanical engineering degree. • First experience of 3 years minimum in Mechanical Calculation, nuclear industry, or equivalent experience. • Knowledge of EUROCODE, ASME and RCC-M code. • Knowledge of 2D/3D design and calculation software. If possible, knowledge of these specific software: PDMS, NavisWorks, PIPESTRESS, RSTAB, ANSYS APDL and WORKBENCH. • Knowledge of piping and support calculation tools. • Experience working in a multicultural environment. • Curious, autonomous, rigorous and motivated to learn. Desirable Qualifications, Experience and Skills: • Knowledge of the HPC project or previous EPR and associated studies/doctrine is a real asset • Knowledge of Nuclear engineering and specificities, building NI, CI & BoP buildings would be beneficial. • Excellent Interpersonal skills, conscientiousness, organisation, writing ability • Good organizational, writing and oral expression skills in English are essential for the realization of the activities of document production, steering and interfaces with the various correspondents. • Ability to meet commitments and deadlines. Level of Experience: 3 years of professional experience post-graduation Languages (level) English fluent (required) French – bonus
Minimum level of education required : Technical Certificate / Diploma

2026-27975 - Health Safety & Environmental Advisor

Tue, 06 Oct 2026 14:39:31 Z

Category : S - HEALTH,SAFETY,SUSTAINABLE DEVELOPMENT/S1 - Health, safety, sustainable development
Job type : Non fixed term
Job details :
The Health and Safety advisor’s mission, responsibilities, and competencies in particular cover: Reporting to the Project Health Safety and Environmental Manager on Health Safety and Environmental issues, performance and areas that require improvement, Producing reports as required to the Project Health Safety and Environmental Manager Support Framatomes Site Supervision in Occupational Health Safety and Environmental Matters, Co-ordination and co-operation with the Principal Contractor, Support Framatomes Subcontractors and others as necessary on Health Safety and Environmental issues, Monitoring compliance with, and enforcing, site safety rules and procedures, Ensuring adherence / compliance with UK Legislation & regulations and the clients procedures and standards, Reviewing method statements and risk assessments including Framatome’s subcontractors’ documentation, Monitoring Subcontractors’ activities against approved method statements and risk assessments, Attend daily Health Safety and Environment Morning / End of day meetings, Attend Health Safety and Environment Team briefs, Performing any required investigations into Accidents or Near Misses, Carry out onsite work place inspections

A minimum of 5 to 10 years working as an Occupational Health Safety Advisor Results Driven. Pragmatism. Good Communication skills. Capable of finding solutions, particularly when changes are required to ensure safe working practices and safe behaviours. Strong interpersonal skill, with the ability to work as a team or alone. Comprehensive working knowledge of all the Microsoft office packages NEBOSH National General in Occupational Safety and Health NEBOSH National Construction in Occupational Safety and Health
Minimum level of education required : Non-Degree Program

2026-27817 - Lifting Superintendent

Wed, 23 Sep 2026 11:41:00 Z

Category : TB - CONSTRUCTION & COMMISSIONING/TB2 - Construction
Job type : Non fixed term
Job details :
Lifting Superintendent Energise Your Career with Framatome UK – Powering a Safer, Smarter Nuclear Future We are currently seeking a Lifting Superintendent here to join our team in Hinkley Point C, Bridgwater here with rigging experience to assist with overseeing mechanical lifting activities associated with the installation of the primary components of the 2 nuclear reactors being installed in Hinkley Point C. What will you be doing? Accountabilities: Assist with implementation of Processes and Procedures to effectively control mechanical lifting activities for Framatome scope of works . Review lift plans in accordance with Framatome & NNB Lifting Standards Carry out lifting assurance checks to ensure that the lifting equipment utilised by Framatome and their sub-contractors is thorough examined (including lifting accessories) Have knowledge and understanding to allow selection of appropriate rigging lifting accessories, including their method of attachment to the load, and any protection used to prevent damage Oversea and liaise with subcontractor briefings to all lifting/rigging personnel prior to the lifting operation to ensure that the safe system of work described in the lift plan is understood. Ensure lift plans are reviewed and to the correct standard to ensure safe Lifting/Rigging Plan resource to ensure there is a Lift/rigging Supervisor designated to direct personnel and to ensure that the operation is carried out in accordance with the lift plan Be able to identify / Investigate hazards associated within the lifting activity area Liaise with any other persons or authority, as required to overcome any hazard, by including any necessary corrective action or special measures in the safe system of work Attend coordination meetings with principle contractor to book crane slots to facilitate site activities. Key Deliverables: Produce / review Lifting plans for rigging activities Ensure lifting activities comply with legislation, standards, ACOP.s and Framatome & NNB lifting standards. Establish and maintain a high standard of health and safety, carry out site inspections to ensure Safe systems of works are being adhered too, with safety rules are being implemented to deliver the scope of works following a positive Nuclear Safety Culture. Support the Lifting Manager in the delivery of all lifting activities associated with the Framatome scope of works on Hinkley point C. Support the Lifting Manager to ensure compliance with all nuclear safety and site licence requirements Support the Lifting Manager to ensure resource to meet organisational requirements are available in line with the delivery schedule.

What are we looking for? Experience: Lift planning rigging operations (essential) Lift planning using Mobile/Crawler/Tower cranes (preferred) AutoCAD proficient (preferred) Experience working in nuclear power preferred, or power stations / refineries to be aware of safety culture within this industry. Experience working on major construction projects (preferred) Qualifications ECITB Appointed Person Moving Loads and TAP01(Preferred) NVQ Level 3 Steel Erecting/Moving Loads (preferred) or ACE card CPCS A61 Appointed Person (Blue Card) Can achieve Security Clearance (BPSS or Higher) IOSH managing safely or SMSTS Additional key skills: Leadership – ability to plan and manage particularly people and resources Independent judgement – ability to identify limits of personal and team’s knowledge and skill Health, safety, and welfare – a sound knowledge of legislation, hazards and safe systems of work, ability to manage health, safety and welfare within own area of responsibility Interpersonal skills and communication – ability to communicate well with others at all levels, ability to discuss ideas and plans competently and with confidence Results driven: Ability to persist in the face of challenges to meet deadlines with high standards Taking initiatives, autonomy The role of the rigging superintendent will be to aid in the planning of rigging activities with the sub-contractor, review lift plans submitted by lifting by sub-contractor, and then aid in the setting to work and supervision of the works and carry out any assurance checks / audits to maintain a high standard of safety / right first time.
Minimum level of education required : Technical Certificate / Diploma

2026-27741 - HSE Advisor

Fri, 18 Sep 2026 14:47:31 Z

Category : S - HEALTH,SAFETY,SUSTAINABLE DEVELOPMENT/S1 - Health, safety, sustainable development
Job type : Non fixed term
Job details :
HSE Advisor We have an exciting opportunity to join our Quality, Health, Safety and Environment team here at Framatome UK! Energise Your Career with Framatome UK – Powering a Safer, Smarter Nuclear Future We are currently seeking a HSE Advisor to join our team in Hinkley Point C, Bridgwater to play a crucial role in ensuring the health and safety of personnel, protecting the environment, and maintaining compliance with rigorous regulatory standards. This position requires a strong understanding of both general and nuclear-specific HSE risks, excellent communication skills, and a proactive approach to continuous improvement What will you be doing? Advise management and operational teams to ensure all activities comply with applicable laws, regulations, and company policies. Support interactions with regulatory authorities during inspections, audits, and reporting. Conduct regular risk assessments to identify radiological, chemical, biological, and conventional hazards in the workplace. Recommend and help implement effective control measures to mitigate identified risks, ensuring the safety of employees and the public. Support the implementation and monitoring of permit-to-work systems for high-risk activities. Assist in the immediate response to HSE incidents, including containment, notification, and initial investigation. Participate in or lead investigations into incidents and near-misses, ensuring root causes are identified and corrective actions are implemented. Help disseminate lessons learned from incidents to prevent recurrence. Develop and deliver HSE training and induction programs for employees and contractors as required. Conduct regular workplace inspections and safety tours to monitor compliance with HSE standards and identify unsafe conditions or behaviours. Support environmental monitoring programs Ensure accurate and up-to-date records of risk assessments, incidents, training, inspections, and regulatory submissions. Assist in the development and maintenance of HSE procedures, policies, and manuals. Contribute to the development, review, and testing of emergency response plans. Participate in organising and evaluating emergency drills to ensure readiness. Track HSE performance indicators, analyse trends, and recommend improvements. Stay up to date with national and international HSE regulations and standards relevant to nuclear operations Stay informed of industry best practices and support their implementation within the organisation. Advise and support employees, supervisors, and managers on HSE matters. Assist in communicating HSE performance and initiatives to external stakeholders, including contractors, regulators, and the local community.

What are we looking for? Experience of set up and implementing processes and procedures. On-site experience of maintenance, manufacturing, fabrication and erection including lifting operations, Temporary Works etc Excellent team working skills The ability to work with minimum supervision and intervention Ability to take responsibility for problems within their own remit and to deliver solutions Results focused with the ability to meet commitments and deadlines. Confident manner, good presentation skills Determination - not easily discouraged or put off Positive outlook – always sees opportunity through any adversity Work pattern: On Site Training and Development Expectations: NEBOSH certificate Experience in Accident / Incident Investigation /Problem solving Experience in highly regulated industries preferred. Experience of Nuclear or other high risk, high regulated industry is highly desirable. Knowledge of Post weld heat treatment an advantage. Understanding of the key attributes of nuclear safety culture Demonstrable field engagement (site) Experience in Project delivery, (or relevant challenging environment)
Minimum level of education required : Technical Certificate / Diploma

2026-27585 - Warehouse and Logistics Manager

Fri, 11 Sep 2026 12:59:10 Z

Category : V - ON SITE SERVICES/V1 - On site management
Job type : Non fixed term
Job details :
We are currently seeking a Warehouse and Logistics Manager here to join our team in Hinkley Point C, Bridgwater, here to lead and manage all warehouse, materials, stores and logistics operations, ensuring the safe, efficient and cost-effective delivery of materials and equipment to support business and project objectives. Accountable for inventory control, logistics performance, resource planning, supplier coordination and continuous improvement activities, the role drives operational excellence, compliance and stakeholder satisfaction while supporting successful project delivery What will you be doing? Lead and manage warehouse personnel and subcontractors, ensuring safe working practices, high productivity and compliance with project requirements. Develop and implement warehouse, materials management and logistics processes. Take ownership of site inventory, stock control and material traceability, ensuring accuracy and availability of critical project materials. Forecast material demand and coordinate procurement activities to support programme milestones and minimise schedule risks. Expedite purchase requisitions and purchase orders, working closely with procurement teams and suppliers to ensure timely material availability. Manage delivery schedules, goods receipt, inspections, and material distribution across multiple work fronts. Coordinate site logistics strategies, material movements, storage solutions and resource planning to maximise operational efficiency. Maintain compliance records for calibrated equipment, tools and certification requirements. Act as the primary interface between construction, procurement, suppliers, and project management teams on all material-related matters. Proactively identify and resolve material shortages, delivery issues,and supply chain risks to prevent impact to project progress.

What are we looking for? Knowledge / Soft skills: • ISO 9001 • Excellent management style - encouraging, inspiring, and enabling the team around you to be the very best they can be, having a good understanding of computer and warehouse management systems, Excellent relationship building skills, Experience of health and Safety in a warehousing environment. • Valid Full Driving License. • SSSTS Certificate • CILM BE+ Nuclear Unit • Knowledge of SAP storage management module • Experienced Forklift Driver / Overhead Travelling Crane Driver / Rigger, Basic mechanical and electrical storage knowledge. Training and Development Expectations: Educational basics • Level 3-5 qualification in Supply Chain, Logistics, Warehousing (Essential) HNC/HND in Engineering, Supply Chain, Logistics, Construction Management, or similar (Desirable) • ILM Level 3 to5 in Leadership & Management. (Desirable) • CILT (Chartered Institute of Logistics and Transport) qualification.(Desirable) Professional basics • Previous experience of MS Office, Asset managgent, Experience of working on Large Construction projects in an international context, • CITB HSE Test Supervisors Key outputs: - Ensure the efficient receipt, storage, control and distribution of all materials, equipment and project assets. - Maintain accurate inventory records and material traceability, ensuring stock accuracy and availability to support project delivery. - Manage non-conformances, shortages and damaged goods, ensuring timely resolution and escalation where required. - Lead and coordinate all warehouse, stores and logistics activities to ensure materials are available when required. - Optimise storage, handling and transportation processes to maximise efficiency, minimise risk and reduce costs. - Coordinate site deliveries and logistics activities with internal supply chain teams, project stakeholders and external providers. - Ensure warehouse and storage operations comply with all Health & Safety, environmental, quality and project requirements. - Maintain warehouse facilities, equipment, lifting assets and associated inspection, certification and maintenance records. - Ensure effective document control, material records management and project archiving requirements are maintained. - Lead, develop and manage warehouse personnel and subcontractors, ensuring resources are aligned with project requirements. - Drive a culture of safety, accountability, continuous improvement and operational excellence. - Monitor performance, establish priorities and ensure delivery against business and project objectives. - Process Improvement & Governance - Develop, implement and continuously improve warehouse, materials management and logistics procedures. - Monitor key performance indicators and identify opportunities to improve efficiency, inventory control, customer service and cost performance. - Support business continuity
Minimum level of education required : Associates

2026-27453 - HSE Advisor

Fri, 28 Aug 2026 13:51:11 Z

Category : S - HEALTH,SAFETY,SUSTAINABLE DEVELOPMENT/S1 - Health, safety, sustainable development
Job type : Non fixed term
Job details :
What you will be doing? playing an integral part in co-ordinating safety and quality activities within the Cranfield site and also liaising with other sites in the UK. In addition, it is to develop a Continuous Improvement approach HSEQ on the site. Safety is Framatome’s overarching value. providing support and guidance on all HSE matters relating to the Cranfield site. Continuous improvement is a key part of our business and in this role, you will be very active in improving all aspects of HSEQ. Reporting operationally to the IMS Manager and hierarchically to the Head of HSE, you will also develop effective working relationships with the local Management Team to enable a first-class safety, environmental and quality service to be delivered. The HSE Advisor will work closely with: The project, engineering and design teams to ensure that quality, health, safety and environmental within Integrated Management System is maintained, adhered to, developed, and improved to meet our business needs, customers and regulatory requirements. With the engineering and project managers to ensure that HSE programs are communicated and deployed within Engineering BL and related agreed performance indicators measured and actioned upon when required; With the IMS Manager to ensure that the performance of the IMS is deployed and adhered to in the operational areas With Framatome Head / Deputy Head of QHSE to inform of events and performances regarding HSE, adherence to and evolution of regulatory framework in relation to the business; The HSE Advisor will directly: System: Work with the Operations team to improve quality, health, safety and environmental performance at the site, improving the processes and reporting. Critically analyse current processes and report on potential improvements. Assist in implementing those improvements. Work with the wider HSE functions and the IMS team to monitor and implement changes to the Management System. Assurance: Report on HSE KPI’s, internally, and externally. Organise operational inspections, audits and verification checks and acts on the findings. Technical Advice: Provide on-site consultancy for the formulation of RAMS for off-site activities. Ensure that Risk Assessments are written properly, and staff read and understand them. Assist with the writing of quality plans for projects and overseeing their implementation. Training: Coaching and mentoring site supervision in HSE practices, roles and responsibilities Assist with developing internal training and awareness and delivering where required Engagement and Culture: Hold quality meetings and regular HSE meetings. Networks within Framatome Ltd and the wider European organisation to understand their processes and implement improvements to ours.

Required Attributes: IOSH / NEBOSH safety certificate Experience in Accident / Incident Investigation /Problem solving Experience in highly regulated industries. Experience of Nuclear industry is highly desirable Understanding of the key attributes of nuclear safety culture Demonstrable field engagement Good knowledge of performance management techniques and/or route cause analysis technics (FMEA, A-Z, 5 Whys LEAN, Six Sigma,) Desired Attributes: Internal auditor for ISO9001,14001, 45001 Experience of implementing processes and procedures. On-site experience of engineering, chemical, design activities Desired Personal Characteristics: Excellent team working skills The ability to work with minimum supervision and intervention Ability to work in a team as well as on own initiative with a can -do attitude Ability to take responsibility for problems within their own remit and to deliver solutions Results focused with the ability to meet commitments and deadlines. Assertive – gets things done when they need to be Confident manner, good presentation skills Determination - not easily discouraged or put off Passion, enthusiasm, and charisma. Positive outlook – always sees opportunity through any adversity Resilient – ready to bounce back from any challenges Excellent communication and interpersonal skills including influencing and presenting Discretion, ability to maintain confidentiality
Minimum level of education required : Bachelor

2026-27376 - Plater

Tue, 18 Aug 2026 15:18:03 Z

Category : P - PRODUCTION/P4 - Manufacturing Management and generalist
Job type : Fixed term
Job details :
What are we hiring for? We are seeking a Plater to join our team in Hinkley Point C, Bridgwater to ensure product is delivered in line with the documented procedures and standards. What will you be doing? Within this position you will be responsible for: Adhering to weld procedures, relevant quality procedures and assist with quality records and documentation Cutting, shaping and joining plate metal Maintaining equipment and small tools for assembly / welding / calibration Working from detailed engineering drawings Be suitably familiar with the contents of this Risk Assessment and Method Statements and Permit to Work Attending any HSE training, meetings, etc. as requested. Attending, participate in and periodically lead Toolbox Talks. Ensuring that tools, equipment and materials brought into and used in the area are fully checked and are compliant with HSE requirements. Ensuring that no work is carried out unless supported by the relevant specific Method Statements, Risk Assessments and Work Permits. Ensuring that all incidents and near misses are reported

What are we looking for? Be time served / apprentice trained Experience in fabrication of Stainless-steel equipment Read and understand detailed CAD drawings Used to working in a production and engineering environment Experience of supervising site activities and subcontractors Knowledge of current Health & Safety regulations Team working ability Works calmly under pressure Has a questioning attitude Challenges what is considered unacceptable behaviours Training and development expectations: Level 3 Apprenticeship in Plating, Fabrication, Welding, Structural Steelwork or Shipbuilding Time served / apprenticeship trained CITB Operatives Test CCSNG & NVQ Level 3 ACE Card (Blue) City & Guilds Medium Confined Space Level 2 (desirable) NVQ Level 3 Occupational Work Supervision (desirable)
Minimum level of education required : Non-Degree Program

2026-27375 - Welder

Tue, 18 Aug 2026 15:11:31 Z

Category : P - PRODUCTION/P4C - Welding assembling
Job type : Fixed term
Job details :
What are we hiring for? We are seeking a Welder to join our team in Hinkley Point C, Bridgwater to play a critical role by joining stainless steel parts together through the use of heat using the TIG (141) and or MMA (111) process both manual and semi-automatic equipment. What will you be doing? Setting up, maintaining, and operating welding equipment safely and efficiently. Applying knowledge of metallurgy and material properties to the welding process Understand and ensuring work is done in compliance with relevant WPS Maintaining a clean and safe work environment Ensure the work is done safely and meets quality standards. Provide a highest level of attention to detail and focus on the given task. Follow company rules and policies Good time keeping A good level of fitness and resilience Ensure efficient and safe operations while adhering to project specifications and standards

What are we looking for? BS EN ISO 9606 Coded Welding Qualification to be completed at the Avonmouth facility. Entry level trade test for NNB at the Bridgwater college conducted by the ECITB One of the below: Level 2 or Level 3 Diploma in Welding or Fabrication discipline Welding apprenticeship or an equivalent apprenticeship in a Welding discipline (Minimum Level 5 in the above if apprenticeship/qualification awarded in Scotland) Plus: A minimum of 3 years' experience as a Welder in a relevant industry verified against the job role via a Competency Based Interview with management company subject matter expert (SME). Or A minimum of 5 years' verified experience as a Welder in a relevant industry and a Competency Based Interview against Job Role with the NNB Welding SME CCSNG Safety Passport Required: Need to fit the MEH matrix to weld on HPC. A welding Diploma or apprenticeship. Ideal experience for this position would include: Experience in multiple welding processes to include TIG (141) MMA (111) and FCAW (136) A keen attitude with a willingness to work and learn with a good attitude to health and safety but also when to say there is a problem to preserve the quality of the Framatome product.
Minimum level of education required : Non-Degree Program

2026-27029 - Senior Project Manager

Thu, 09 Jul 2026 12:15:38 Z

Category : G - PROJECT MANAGEMENT/G1 - Project Management
Job type : Non fixed term
Job details :
Reporting to the Head of Project Management, the key objective of the Senior Project Manager will be to ensure assigned programmes or projects are planned and delivered in line with agreed contractual obligations and expectations with the intention to create a positive and collaborative client relationship. The SPM leads the delivery of complex, high-value programmes or projects, ensuring compliance with strict safety, regulatory, and quality standards. The SPM is accountable for the planning, execution, and completion of projects within scope, time, and budget. They act as the key interface between customers, internal stakeholders, and contractors to ensure successful project delivery. The role of the Senior Project Manager includes, but is not limited to, the following aspects: - Ensure projects are executed and controlled to meet customer requirements and minimise risks for the business. - Ensure full compliance with nuclear safety, quality and environmental standards. - Take responsibility for executing the project management processes on assigned projects. - Develop, maintain and manage project plans, schedules, risk registers and budgets. - Lead hazard identification and risk assessments relevant to project activities. - Manage contracts and procurement processes in line with business processes to deliver project objectives. - Manage the relationship with the client and all stakeholders including third parties/vendors. - Manage and coordinate multi-disciplinary teams including engineering, QSHE, commercial, project controls and operations to ensure successful project delivery. - Monitor project performance, conduct regular reporting, and implement corrective actions where necessary. - Provide input regarding project resource needs based on assessment of their projects future workload. - Conduct lessons learned and continuous improvement processes to drive efficient project delivery. - Champion project governance, quality assurance, and change control processes. - Promote a culture of safety, continuous improvement, and innovation. - Coach and mentor junior members of the team. Key Outputs: - Successfully delivered projects within agreed timeframes, cost, scope, and quality metrics. - Delivery against Customer requirements with high safety and quality performance, strong OTIF delivery and minimum risk. - Project documentation including project plans, schedules, risk registers etc. - Accurate and timely reporting to the leadership team and other key stakeholders. - Strong leadership and development of their integrated project delivery team. - Effective stakeholder and interface management across multiple functions and organisations, including subcontractors and suppliers. - Strong customer and stakeholder relationships with trust between parties. - Lessons learned captured, communicated and applied to future project delivery.

Senior Project Managers would be expected to already hold the following (or demonstrate capability to the level of): - Degree in Project Management, Engineering, or related discipline. - APM PPQ or equivalent, working towards Chartership. - Member of a recognised project professional body (e.g., APM, PMI). - IOSH or NEBOSH Managing Safely (highly desirable). - In-depth knowledge of ISO standards (ISO 9001, 14001, 45001, 19443) and working knowledge of IMS systems. - Knowledge of the key attributes of nuclear safety culture. And would be expected to gain the following within 3 years: - Chartered project professional status. - A recognised qualification in leadership. - Managing Successful Programmes (MSP). The SPM will be a resilient, innovative, and highly experienced project professional with a passion for project delivery, people development, and navigating the complexities of highly regulated industries, particularly the nuclear sector. Experience, Skills and Knowledge: - Extensive experience in managing large, highly regulated projects with a particular focus on £5M+ projects in highly regulated environments. - Proven experience in highly regulated industries – working within environments that require strict adherence to regulatory standards and practices. - Strong ability to manage project controls artefacts such as schedules and cost models, with expertise in Primavera and MS Project for project tracking and resource management. - Application of QSHE Standards such as ISO 9001, 14001, 45001 and 19443. - Familiarity with quality and continuous improvement methodologies such as Six Sigma, Lean, etc., and their application to project delivery. - Strong understanding and experience in managing and mitigating project and programme risks. - Ability to apply safety practices in the management of complex projects with high-risk factors. - Skilled in managing budgets to ensure project financial health, and effectively control costs across project lifecycles. - Excellent leadership, communication, and influencing skills. - Ability to navigate complex political and technical environments. Behaviours: - Commitment to safety and compliance. - Strong leadership skills with a proven ability to lead cross-functional teams and communicate effectively with stakeholders at all levels. - Able to think critically and provide solutions to complex project challenges. - Must be meticulous and have an eye for detail, ensuring all aspects of the project are managed efficiently. - Demonstrated ability to make sound, timely decisions based on available data and project objectives. - Must be flexible and adaptable, with a proactive approach to problem-solving and overcoming challenges in a fast-paced and dynamic environment. - Collaborative leadership style with strong team orientation. Experience working on SMR projects is desirable.
Minimum level of education required : Master

2026-26482 - C&I Engineer

Fri, 22 May 2026 15:25:57 Z

Category : TA - DESIGN & ENGINEERING/TAA - Design , engineering management & Systems engineering
Job type : Non fixed term
Job details :
Within the Engineering function of Framatome Ltd, the C&I Engineer performs C&I studies for Framatome Ltd projects and ensures on time and on cost delivery. He also supports the company’s growth and strengthens the technical skills in the C&I field. Key Activities: In close co-ordination with the Lead Engineer on site, perform C&I studies, including analysis of input data, clarification requests, identification of interfaces, link with other disciplines. Ensure the resolution of open point within the team and participates to the resolution of cross-functional technical issues with multidisciplinary stakeholders, internal or external including the Client. Produce site surveys, control architecture drawings, block diagrams, requirement specifications for control panels, instruments, etc Support on-site installation activities. Support the develpment of bids: analyse the contract requirements regarding C&I, identify the appropriate resources, plan the work. If needed, he can prepare work packages to be subcontracted and participate to kick-off meetings with subcontractors. Present and shares progress to the Lead Engineer and to the Management. Contribute to the development of the C&I skills within the Engineering function, in particular the training and mentoring of newcomers. Projects outputs: site surveys, control architecture drawings, block diagrams, requirement specifications for control panels, instruments, etc. Continuous improvement outputs: contributions, suggestions, lessons learnt, experience feedback from projects and to continuous improvement actions.

Training & Development expectations: Engineer with several years of experience in layout and piping. Software and tools: Microsoft Word/Excel, Autodesk Plant 3D, Autocad, E3D/PDMS Key competencies: Interpersonal and communication skills, proactive, influencing skills, ability to work in a team as well as on own initiative, ability to multi-task, logical thinking, results focused with the ability to meet commitments and deadlines. Good knowledge of standards like BS EN IEC 60709, BS 60073, standards relating to electromagntic compatibility BS EN IEC 52003 and 61000, and standards relating to intruments, cables, wiring. Person Specification: - Experience in C&I in industry, ideally in the nuclear industry. - Can communicate easily with other discipline and can help solving multi-disciplinary problems.
Minimum level of education required : Bachelor

2026-25900 - Senior Project Manager

Mon, 27 Apr 2026 13:20:09 Z

2025-23084 - Platers

Tue, 09 Dec 2025 09:37:50 Z

Category : P - PRODUCTION/P4C - Welding assembling
Job type : Non fixed term
Job details :
Framatome is a major international player in the nuclear energy market recognised for its innovative solutions and value-added technologies for designing, building, maintaining, and advancing the global nuclear fleet. The company designs, manufactures, and installs components, fuel and instrumentation and control systems for nuclear power plants and offers a full range of reactor services. With 14,000 employees worldwide, every day Framatome’s expertise helps its customers improve the safety and performance of their nuclear plants and achieve their economic and societal goals. Framatome is owned by the EDF Group (80.5%) and Mitsubishi Heavy Industries (MHI – 19.5%) In the UK we are currently over 300 strong and our plans are to grow to 400-500 by 2025 through the development our UK nuclear service offerings. Due to our ongoing requirements, we are recruiting for Platers to join our HPC team. Reporting to the Site Manager and Construction Manager, Platers will be required to: To mark out and fabricate complex fabrications competently To tack welding of components using TIG To work from detailed engineering drawings To adhere to fabrication process and procedures, relevant quality procedures and assist with quality records and documentation for all work carried out To maintain equipment and small tools for assembly / tack welding To ensure all measuring equipment is calibrated. Detailed QHSE responsibilities: To never undertake work without first ensuring that means will be in place to guarantee that the work can be done in a safe and compliant manner. To be suitably familiar with the contents of this Risk Assessment and Method Statements and Permit to Work To attend any HSE training, meetings, etc. as requested To attend, participate in and periodically lead Toolbox Talks To ensure that tools, equipment and materials brought into and used in the area are fully checked and are compliant with HSE requirements To ensure that no work is carried out unless supported by the relevant specific Method Statements, Risk Assessments and Work Permits To carry out periodic HSE inspections in the area To ensure that all incidents and near misses are reported.

To be considered, we require the following qualifications and experience: NVQ Level 3 In Fabrication (or equivalent) City & Guilds Medium Confined Space Level 2 (desirable) Technical skills: Fundamental understanding of fabrication drawings; Experience of TIG/MIG/MAG etc for tack welding; Be time served / apprentice trained or relevant experience; Experience in plating of Stainless-steel / Carbon steel structures; Read and understand detailed CAD drawings; Used to working in a production and engineering environment; Knowledge of current Health & Safety regulations.
Minimum level of education required : Non-Degree Program

2025-24114 - Instrumentation and Control Commissioning Engineer

Thu, 04 Dec 2025 10:14:59 Z

Category : TA - DESIGN & ENGINEERING/TAL - Instrumentation and Control
Job type : Non fixed term
Job details :
You’ll be embedded within our commissioning team on Hinkley Point C. You will work alongside software and hardware experts to deliver I&C systems. You will be responsible of ensuring the Control Command Nuclear Safety related is qualified before fuelling the HPC reactors. It will require a high level of professionalism and handling of the human factors. Your future team will ensure high-performance, safe, and compliant commissioning across the reactor system and the auxiliaries systems information used in the safety guardelines. Principal missions · Commissioning and testing Instrumentation & Control (I&C) systems across HPC plant units as part of the OEM’s team. · Conducting root cause analysis and troubleshooting of automation and control faults. · Leading diagnostic testing on TXS, UNICORN. · Overseeing calibration and verification of field instrumentation linked to the cabinets. · Supporting integration and testing within the plant control systems. · Coordinating with system engineering, operations,maintenance. · Ensuring all testing activities are aligned with nuclear safety standards and plant procedures. · Being an example in procedure use and adherence avoiding “blind PU&A” · Having a high level of human performance and quality in delivering the tasks. · Managing documentation for commissioning progress, non-conformances, and system handover. · Ensuring deep first line analysis before raising concerns and work requests. · Taking part of problem resolution groups. · Flexibility will be asked on the location as being part of I&C taskforces in Europe. · This job is not flexible and requires a daily presence on site, therefore you are eligible for a site allowance.

Languages (level) · English fluent · French is a bonus · German is a bonus
Minimum level of education required : Master